Arm Blades

(click on a number to see the picture)


1. Two 18" x 24" sheets of plexi-glass are epoxied together to form one 1/4 inch thick sheet.

2. A template of the blade is made and the form is traced onto the plexi-glass sheet.

3. The forms are cut out on a bandsaw.

4. Detail of the burrs ...

5. ... which are sanded off ...

6. ... and ready to be painted.

7. The armbands that will be attached to the blades...

8. ... needed extra holes in the ends.

9. The armbands without some of their studs.

10. Notches cut into the painted blade.

11. L-brackets attached to the blades with nuts and bolts...

12. ... and attached to the armbands.

13. The finished armblade.


copyright 2003-2004 Archangel Productions